Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

If the WI-FI on your HP Elitebook 2740p is not working properly it may be time to replace your WI-Fi card. This guide will go through the steps to replace it.

Onderdelen

Geen onderdelen opgegeven.

  1. Place the laptop face down in front of you. Use a Phillips #0 screwdriver to remove the three 3 mm screws from the back of the case.
    • Place the laptop face down in front of you.

    • Use a Phillips #0 screwdriver to remove the three 3 mm screws from the back of the case.

    • Remove the back panel.

  2. Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits

    Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits
  3. Remove the two  wires that are  attached to the WiFi card.
    • Remove the two wires that are attached to the WiFi card.

  4. Use a Phillips #0 screwdriver to remove the two 3 mm Philips head screws from the WiFi card. Remove the card. Remove the card.
    • Use a Phillips #0 screwdriver to remove the two 3 mm Philips head screws from the WiFi card.

    • Remove the card.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Andrew Furze

Lid sinds: 26-03-18

202 Reputatie

2 handleidingen geschreven

Team

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 9

Altijd: 214