Ga door naar hoofdinhoud

Inleiding

Use this guide to replace the home button in your HP ElitePad 900.

  1. Unscrew the two 2.8mm Phillips #000 screws near the power connector.
    • Unscrew the two 2.8mm Phillips #000 screws near the power connector.

  2. Use a suction cup to pull the display assembly up. Use a suction cup to pull the display assembly up.
    • Use a suction cup to pull the display assembly up.

  3. Use the tip of a spudger to disconnect the two display ZIF connectors. Use the tip of a spudger to disconnect the two display ZIF connectors.
    • Use the tip of a spudger to disconnect the two display ZIF connectors.

  4. Remove the two 2.4mm Phillips #000 screws.
    • Remove the two 2.4mm Phillips #000 screws.

  5. Lift metal bracket along with blue connector.
    • Lift metal bracket along with blue connector.

  6. Replace connector.
    • Replace connector.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Kyle Marques

Lid sinds: 03-09-15

769 Reputatie

6 handleidingen geschreven

Team

USF Tampa, Team 12-4, Blackwell Fall 2015 Lid van USF Tampa, Team 12-4, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G4

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 6

Altijd: 476