Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

If you are having problems with the motherboard in your HP Deskjet 2624, follow this replacement guide. The motherboard contains all of the principal components of the printer.

Onderdelen

Geen onderdelen opgegeven.

  1. Unplug all cords from the printer and remove the paper.
    • Unplug all cords from the printer and remove the paper.

  2. Using the Torx T5 screwdriver, remove the four screws connecting the scanner bed module to the printer base. Using the Torx T5 screwdriver, remove the four screws connecting the scanner bed module to the printer base.
    • Using the Torx T5 screwdriver, remove the four screws connecting the scanner bed module to the printer base.

  3. Gently lift the scanner bed module slightly off of the printer base. Be sure to carefully unplug the ribbon cables before fully removing the scanner bed. Unplug the ribbon cables by pulling them gently straight out of their plugs.
    • Gently lift the scanner bed module slightly off of the printer base. Be sure to carefully unplug the ribbon cables before fully removing the scanner bed.

    • Unplug the ribbon cables by pulling them gently straight out of their plugs.

  4. Remove the cables connected to the motherboard by gently pulling them straight out. Do not unplug the cables by pulling on the wires.
    • Remove the cables connected to the motherboard by gently pulling them straight out. Do not unplug the cables by pulling on the wires.

    • Unplug the last two ribbons connected to the motherboard by gently pulling them straight out.

    • Be sure to take note of where all plugs and ribbons are connected to the motherboard.

    • Remove the motherboard from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 11

Altijd: 75