Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

In this guide, we will illustrate how to remove and replace the hard drive for this device. Tools required include thumbs and a Phillips screwdriver.

  1. Loosen the two 1.5 cm Phillips #1 screws that attach the cover of the hard drive . Lift up the cover.
    • Loosen the two 1.5 cm Phillips #1 screws that attach the cover of the hard drive .

    • Lift up the cover.

  2. De essentiële toolkit

    De meest behulpzame tools in onze meest compacte kit.

    Koop nu

    De essentiële toolkit

    De meest behulpzame tools in onze meest compacte kit.

    Koop nu
  3. Loosen the 1.5 cm Phillips #1 screw attaching the hard drive to the laptop. Locate the tab on the hard drive. Use this tab to pull the hard drive toward the right side of the case.
    • Loosen the 1.5 cm Phillips #1 screw attaching the hard drive to the laptop.

    • Locate the tab on the hard drive.

    • Use this tab to pull the hard drive toward the right side of the case.

    • Do not pull up on the tab!

    • Remove the hard drive.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Tyler Fricks

Lid sinds: 22-10-15

519 Reputatie

5 handleidingen geschreven

Team

Montana Tech, Team 3-2, Shirk Fall 2015 Lid van Montana Tech, Team 3-2, Shirk Fall 2015

MTUM-SHIRK-F15S3G2

5 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 10

Afgelopen 30 dagen: 47

Altijd: 3,127