Ga door naar hoofdinhoud

HP 14-ac151nr DC Power Jack Replacement

Wat je nodig hebt

  1. HP 14-ac151nr DC Power Jack Replacement, Backplate: stap 1, afbeelding 1 van 1
    • Remove battery by pushing the two buttons inward.

  2. HP 14-ac151nr DC Power Jack Replacement: stap 2, afbeelding 1 van 1
    • Remove the two rubber feet next to the battery.

  3. HP 14-ac151nr DC Power Jack Replacement: stap 3, afbeelding 1 van 1
    • Remove all 14 Phillips head #0 screws.

  4. HP 14-ac151nr DC Power Jack Replacement: stap 4, afbeelding 1 van 1
    • Use a plastic opener tool to pry off the black backplate.

  5. HP 14-ac151nr DC Power Jack Replacement, DC Power Jack: stap 5, afbeelding 1 van 2 HP 14-ac151nr DC Power Jack Replacement, DC Power Jack: stap 5, afbeelding 2 van 2
    • Remove the black tape near the power jack.

    • Remove the screws connecting monitor to the bottom of the computer.

  6. HP 14-ac151nr DC Power Jack Replacement: stap 6, afbeelding 1 van 1
    • Position the metal fittings attached to the monitor out of the way.

    • The monitor is still attached by wires — be careful not to pull on it too hard.

  7. HP 14-ac151nr DC Power Jack Replacement: stap 7, afbeelding 1 van 3 HP 14-ac151nr DC Power Jack Replacement: stap 7, afbeelding 2 van 3 HP 14-ac151nr DC Power Jack Replacement: stap 7, afbeelding 3 van 3
    • Disconnect the power jack from the motherboard.

    • Remove the power jack by lifting it up.

    • An opener tool may make this easier.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Antonio Leonti

Lid sinds: 10/26/18

410 Reputatie

3 handleidingen geschreven

Team

UMass Dartmouth, Team S1-G7, Simcock Fall 2018 Lid van UMass Dartmouth, Team S1-G7, Simcock Fall 2018

UMASSD-SIMCOCK-F18S1G7

3 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 3

Altijd: 418