Grundig TK125 Transport Belts Replacement - iFixit reparatiehandleiding

Inleiding

These 6 steps explain to remove bottom and top covers.. at the bottom side remove the plate (2 screws) which hold the flywheel axle.. this is your opening to replace the 2 belts, forst the biggest belt for the flywheel, the the midsize belt for the drive.. all good..

Stap 1 Transport Belts

Grundig TK125 Transport Belts Replacement, Transport Belts: stap 1, afbeelding 1 van 2

Grundig TK125 Transport Belts Replacement, Transport Belts: stap 1, afbeelding 2 van 2

I have ordered a new belt set on aliepxress, to be continued once i received them

Stap 2

Grundig TK125 Transport Belts Replacement: stap 2, afbeelding 1 van 1

These are the 3 belts needed (if all) for the TK125, the biggest is needed for the flywheel, the midsize of for the drive and the smallest of for the counter.

Stap 3

Grundig TK125 Transport Belts Replacement: stap 3, afbeelding 1 van 2

Grundig TK125 Transport Belts Replacement: stap 3, afbeelding 2 van 2

Now remove the bottom and the top covers so you can reach both sides of the recorder

Stap 4

Grundig TK125 Transport Belts Replacement: stap 4, afbeelding 1 van 2

Grundig TK125 Transport Belts Replacement: stap 4, afbeelding 2 van 2

Remove the flywheel axle restplate, here is your opening to replace both the belts

Stap 5

Grundig TK125 Transport Belts Replacement: stap 5, afbeelding 1 van 1

first you place the large flywheel belt, then you place the midsize belt for the drive

Stap 6

Grundig TK125 Transport Belts Replacement: stap 6, afbeelding 1 van 1

this is the small belt for the counter

Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 1 andere bijdrager

Joenymus

Lid sinds: 03/09/24

148 Reputatie

1 Handleiding geschreven

0 opmerkingen

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 15