Repareer je spullen Gemeenschap Winkel

GravityLight Internal Gears Replacement

Inleiding

If the bag of rocks is not moving due to an internal issue, it might be because the gears are stripped! You will learn how to replace them.

Wat je nodig hebt

  1. GravityLight Internal Gears Replacement, Removing the Front Panel: stap 1, afbeelding 1 van 2 GravityLight Internal Gears Replacement, Removing the Front Panel: stap 1, afbeelding 2 van 2

    • Flip the GravityLight on its back and place it on a sturdy surface.

    • Unscrew the three 2cm Phillips #00 screws on the back of the GravityLight’s body.

    Vertaal

  2. GravityLight Internal Gears Replacement, Opening the Device Housing: stap 2, afbeelding 1 van 1

    • Some of the internal pieces may loosen or fall out during disassembly.

    • Firmly grasp both parts of the GravityLight body and pull them apart.

    Vertaal

  3. GravityLight Internal Gears Replacement, Isolating the Back Panel: stap 3, afbeelding 1 van 1

    • Take the thicker of the two parts, the back piece, and place it face down on a sturdy surface.

    Vertaal

  5. GravityLight Internal Gears Replacement, Removing the Back Panel Screws: stap 4, afbeelding 1 van 1

    • Place the back panel, the larger of the two pieces, on a sturdy surface with its back down.

    • Unscrew the two 2cm Phillips 00 screws on the inside of the back panel.

    Vertaal

  6. GravityLight Internal Gears Replacement, Removing the LED Housing: stap 5, afbeelding 1 van 1

    • Watch out for the wires! Keep them attached for this entire guide, or the GravityLight will not work!

    • Gently lift off the LED housing (the white disk).

    • Set the LED housing on the table next to the body of the device.

    Vertaal

  7. GravityLight Internal Gears Replacement, Removing White Frame and Gear: stap 6, afbeelding 1 van 1

    • Lift off the white piece with four arms.

    • Lift off the black-rimmed gear.

    • Set both pieces aside in a safe place.

    Vertaal

  8. GravityLight Internal Gears Replacement, Removing Internal Gears: stap 7, afbeelding 1 van 2 GravityLight Internal Gears Replacement, Removing Internal Gears: stap 7, afbeelding 2 van 2

    • Lift off the three 3.5cm diameter gears.

    • Replace any stripped gears.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 1 andere bijdrager

Michallynn Hoffman

Lid sinds: 09/26/14

317 Reputatie

3 handleidingen geschreven

Medailles: 5

+2 andere badges

Team

Cal Poly, Team 12-2, Forte Fall 2014 Lid van Cal Poly, Team 12-2, Forte Fall 2014

CPSU-FORTE-F14S12G2

5 Leden

7 handleidingen geschreven

Één opmerking

Where can we find the replacement gears?

fb - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 4

Altijd: 3,057