Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

If you have tried troubleshooting your camera and concluded the reason is because of a dysfunctional component inside the camera, then use this guide to take your first step towards repairing your device!

Onderdelen

Geen onderdelen opgegeven.

  1. Be sure to power off the GoPro before you start disassembly. Pop up and pull back on the clip to remove the screen cover and expose the back panel with the touchscreen.
    • Be sure to power off the GoPro before you start disassembly.

    • Pop up and pull back on the clip to remove the screen cover and expose the back panel with the touchscreen.

  2. OPEN ALLE TABBLADEN

    RAM-upgradekits voor Mac

    Koop kits

    Genoeg RAM
    voor al je tabbladen

    Koop kits
  3. Use the metal spudger to pry around the perimeter of the panel. Pry the panel upwards by inserting the metal spudger into the corner crease between the panel and camera shell.
    • Use the metal spudger to pry around the perimeter of the panel.

    • Pry the panel upwards by inserting the metal spudger into the corner crease between the panel and camera shell.

  4. Pry around the panel to ensure it is not attached to the device. Move the panel to the side so you can access the internal components.
    • Pry around the panel to ensure it is not attached to the device.

    • Move the panel to the side so you can access the internal components.

    • The panel is still attached to the rest of the device with a ribbon cable, so be sure to not tear or damage the cable.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Matthew Tinkey

Lid sinds: 27-08-15

820 Reputatie

4 handleidingen geschreven

Team

USF Tampa, Team 2-4, Blackwell Fall 2015 Lid van USF Tampa, Team 2-4, Blackwell Fall 2015

USFT-BLACKWELL-F15S2G4

4 Leden

12 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 92