Ga door naar hoofdinhoud

Giorgio Armani Watch Butterfly Buckle Clasp Replacement

Wat je nodig hebt

  1. Giorgio Armani Watch Butterfly Buckle Clasp Replacement, Butterfly Buckle Clasp: stap 1, afbeelding 1 van 1
    • Place the watch in the band holder.

    • Make sure to align the band pin directly over one of the holes.

  2. Giorgio Armani Watch Butterfly Buckle Clasp Replacement: stap 2, afbeelding 1 van 1
    • Use your pin push and rubber mallet to knock it through.

  3. Giorgio Armani Watch Butterfly Buckle Clasp Replacement: stap 3, afbeelding 1 van 1
    • Use your pliers to pull the pin the rest of the way through.

  4. Giorgio Armani Watch Butterfly Buckle Clasp Replacement: stap 4, afbeelding 1 van 3 Giorgio Armani Watch Butterfly Buckle Clasp Replacement: stap 4, afbeelding 2 van 3 Giorgio Armani Watch Butterfly Buckle Clasp Replacement: stap 4, afbeelding 3 van 3
    • Repeat steps 1-3 on the other side to fully release the old clasp from the watch.

  5. Giorgio Armani Watch Butterfly Buckle Clasp Replacement: stap 5, afbeelding 1 van 1
    • Slide the pin back in halfway, then reattach both sides of your new clasp to your watch.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Caleb Shuford

Lid sinds: 02/22/18

121 Reputatie

1 Handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 3

Altijd: 854