1. The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.
    • The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.

    Voeg opmerking toe

  2. Locate the wireless card on the right side of the now removed panel.
    • Locate the wireless card on the right side of the now removed panel.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Remove the screws in the two possible locations.

    Voeg opmerking toe

    • After removing the screws, gently pull upwards on the end of the wireless card until it is angled as shown.

    Voeg opmerking toe

    • Pull the card diretly outward from its socket, all while being mindful of the connected wires.

    • Remove the wired connections by gently pulling them diretly away from the card. Please remember where each one was connected, it will be useful for reconnecting

    Voeg opmerking toe

    • Reconnect wires to new wireless card and screw back into place.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Shawn Cabral

Lid sinds: 12-03-14

463 Reputatie

4 handleidingen geschreven

Team

UMass Dartmouth, Team 5-4, Cichon Spring 2014 Lid van UMass Dartmouth, Team 5-4, Cichon Spring 2014

UMASSD-CICHON-S14S5G4

3 Leden

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 7

Altijd: 404