Inleiding

To network card allows the device to access wireless networks. To access this part the rear cover will need to be removed.

Onderdelen

Geen onderdelen nodig.

  1. Push orange locking tab with spudger right,  until battery lifts out of place.
    • Push orange locking tab with spudger right, until battery lifts out of place.

      • Laptop should be unplugged from power supply before removal.

  2. Unscrew the two  7 mm long #0 Phillips screws.
    • Unscrew the two 7 mm long #0 Phillips screws.

    • Lift and remove the cover panel via the indentation in the middle of the panel.

    • Dislocate the white wire by pushing upward away from the network card.

    • Dislocate the black wire by pushing upward away from the network card.

    • Unscrew the 3 mm long #0 Phillips head screw.

    • Pull the card outward to remove.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Aaron Allison

Lid sinds: 05-11-18

433 Reputatie

5 handleidingen geschreven

Team

IUPUI, Team S1-G1, Baechle Fall 2018 Lid van IUPUI, Team S1-G1, Baechle Fall 2018

IUPUI-BAECHLE-F18S1G1

3 Leden

5 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 16

Altijd: 48