Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

The only prerequisite for the WiFi card is the Base Cover.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.
    • Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.

  2. Lift up the base cover from the the top with your hands to a 90 degree angle.
    • Lift up the base cover from the the top with your hands to a 90 degree angle.

    • Remove the base cover and place it in a safe and dry place.

  3. Remove the 3/16" screw located at the bottom left corner of the WiFi card using a Phillips #0 Screwdriver.
    • Remove the 3/16" screw located at the bottom left corner of the WiFi card using a Phillips #0 Screwdriver.

  4. Locate the black and white cables attached to the WiFi card.
    • Locate the black and white cables attached to the WiFi card.

    • Gently wiggle the black cable until it detaches from the WiFi card.

    • Repeat the previous step for the white cable.

  5. Gently, remove the Wifi card from its slot, and place it in a dry and safe place.
    • Gently, remove the Wifi card from its slot, and place it in a dry and safe place.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Ruben

Lid sinds: 22-04-14

286 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 7-24, Regan Spring 2014 Lid van Cal Poly, Team 7-24, Regan Spring 2014

CPSU-REGAN-S14S7G24

4 Leden

18 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 1,047