Inleiding

Access to the Hard Drive Compartment will require some tool work.

Onderdelen

Geen onderdelen nodig.

  1. Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.
    • Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.

    Voeg opmerking toe

  2. Lift up the base cover from the the top with your hands to a 90 degree angle.
    • Lift up the base cover from the the top with your hands to a 90 degree angle.

    • Remove the base cover and place it in a safe and dry place.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Remove the 1/4" Phillip screw located at the top right of the Hard Drive using a Phillips #0 Screwdriver .

    Voeg opmerking toe

    • Remove the Hard Drive component from its compartment. To do so, slide the component downward away from the battery pack.

    • Lift the Hard Drive to a 90 degree angle and out of its slot.

    • Place the Hard Drive in a designated zone.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Tim En

Lid sinds: 26-01-13

487 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 7-24, Regan Spring 2014 Lid van Cal Poly, Team 7-24, Regan Spring 2014

CPSU-REGAN-S14S7G24

4 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 10

Altijd: 553