Skip to main content
  1. Locate the four screws in the four corners of the back panel.
    • Locate the four screws in the four corners of the back panel.

  2. Using a T5 Torx Screwdriver, begin unscrewing the  four 11.0 mm  screws from the back panel.
    • Using a T5 Torx Screwdriver, begin unscrewing the four 11.0 mm screws from the back panel.

  3. Using a plastic opening tool or similar object, find the groove in the side of the device and begin prying open the back panel. Work the tool around the entire panel until it pops off.
    • Using a plastic opening tool or similar object, find the groove in the side of the device and begin prying open the back panel. Work the tool around the entire panel until it pops off.

  4. Lift the beige clamp using a tweezer or your fingernail and remove the connector.
    • Lift the beige clamp using a tweezer or your fingernail and remove the connector.

  5. Android Fix Kits

    Slechts één reparatie scheidt jou van een nieuw scherm of een nieuwe batterij.

    Nu winkelen

    Android Fix Kits

    Slechts één reparatie scheidt jou van een nieuw scherm of een nieuwe batterij.

    Nu winkelen
  6. Lift the connector gently from the socket.
    • Lift the connector gently from the socket.

  7. Lift and separate the speaker connector cable using a pair of tweezers.
    • Lift and separate the speaker connector cable using a pair of tweezers.

  8. Gently lift the speaker out of the back cover using a plastic opening tool.
    • Gently lift the speaker out of the back cover using a plastic opening tool.

    • Apply force as needed if there is glue holding the speaker in place.

  9. Using a pair of tweezers, grab the connecting wires and lift the terminal from the motherboard.
    • Using a pair of tweezers, grab the connecting wires and lift the terminal from the motherboard.

    • Avoid contacting battery terminals with metallic objects.

  10. Pry the battery out of the back cover using a plastic opening tool.
    • Pry the battery out of the back cover using a plastic opening tool.

    • Work the edges and apply force when removing the battery, as it will be glued down.

  11. Using a T5 Torx Screwdriver, unscrew the 5 screws holding the motherboard in place.
    • Using a T5 Torx Screwdriver, unscrew the 5 screws holding the motherboard in place.

  12. Tilt and slide the motherboard out of the back cover.
    • Tilt and slide the motherboard out of the back cover.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Ricardo Audain

Lid sinds: 07-09-16

551 Reputatie

5 handleidingen geschreven

Team

USF Tampa, Team 6-4, Remmell Fall 2016 Lid van USF Tampa, Team 6-4, Remmell Fall 2016

USFT-REMMELL-F16S6G4

4 Leden

5 handleidingen geschreven

Voeg een opmerking toe

Bekijk statistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 3

Aller tijden: 245