Ga door naar hoofdinhoud

Garmin Vivoactive HR Display Replacement

Wat je nodig hebt

  1. Garmin Vivoactive HR Display Replacement, Display: stap 1, afbeelding 1 van 1
    • Apply the Heated iOpener to the display for 30 seconds to soften the adhesive..

  2. Garmin Vivoactive HR Display Replacement: stap 2, afbeelding 1 van 1
    • Insert a spudger between the display and watch body.

    • Pry upwards and work the spudger around the perimeter of the display to free it from the body.

    • The display is still attached with ribbon cables so don't remove completely.

  3. Garmin Vivoactive HR Display Replacement: stap 3, afbeelding 1 van 1
    • Lift the touchscreen to expose ribbon cables that connect it to the main circuit board.

  4. Garmin Vivoactive HR Display Replacement: stap 4, afbeelding 1 van 2 Garmin Vivoactive HR Display Replacement: stap 4, afbeelding 2 van 2
    • Use the flat end of a spudger to disconnect the display cable press connectors from the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

16 andere personen hebben deze handleiding voltooid.

Chris Corry

Lid sinds: 07/05/18

256 Reputatie

1 Handleiding geschreven

Team

IUPUI, Team S2-G5, Harley Summer 2018 Lid van IUPUI, Team S2-G5, Harley Summer 2018

IUPUI-HARLEY-SU18S2G5

3 Leden

3 handleidingen geschreven

19 opmerkingen

Hello,

thanks for this. Where can i buy the new screen?

Bowland Olan - Antwoord

Nice guide! Thanks. But I can’t find any parts to repair my watch

Christoph Freydank - Antwoord

Yeah, where can we get the parts from? Also how hard is it to change the battery? Thanks for your help :)

Rick - Antwoord

What type of glue i use to connect the display an the body?

culibrkboj - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 18

Afgelopen 30 dagen: 76

Altijd: 25,673