Inleiding

Before you begin disassembling the device, be sure the power is off.

Onderdelen

Geen onderdelen nodig.

Wedge a plastic opening tool in between the outer frame and the rear panel assembly. Pry the outer frame off the perimeter of the rear panel assembly.
  • Wedge a plastic opening tool in between the outer frame and the rear panel assembly.

  • Pry the outer frame off the perimeter of the rear panel assembly.

  • The cover will easily pop off.

Voeg opmerking toe

Remove the four #00 Phillips screws securing the front case assembly to the rear case assembly. Carefully lift, but do not completely separate, the front case assembly from the rear case assembly.
  • Remove the four #00 Phillips screws securing the front case assembly to the rear case assembly.

  • Carefully lift, but do not completely separate, the front case assembly from the rear case assembly.

  • Be extremely cautious when separating both halves, as the rear case assembly is still attached to the front case assembly via a few connectors.

Voeg opmerking toe

Gently pull the battery cable connector from its socket on the motherboard.
  • Gently pull the battery cable connector from its socket on the motherboard.

  • The second connector can remain attached to the motherboard, but be careful not to break the connector while handling both halves of the device.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Andrew Burman

Lid sinds: 18-01-12

1 reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 11-19, Maness Winter 2012 Lid van Cal Poly, Team 11-19, Maness Winter 2012

CPSU-MANESS-W12S11G19

4 Leden

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 1,267