Repareer je spullen Gemeenschap Winkel

Garmin Nuvi 42LM Screen Replacement

Inleiding

You will be removing several screws to get to the screen. Eventually, you will pop out the screen to replace it.

Wat je nodig hebt

  1. Garmin Nuvi 42LM Screen Replacement, Back Cover: stap 1, afbeelding 1 van 3 Garmin Nuvi 42LM Screen Replacement, Back Cover: stap 1, afbeelding 2 van 3 Garmin Nuvi 42LM Screen Replacement, Back Cover: stap 1, afbeelding 3 van 3

    • Remove the four screws on the back of the GPS using the T5 Torx screwdriver.

    Bewerken

  2. Garmin Nuvi 42LM Screen Replacement: stap 2, afbeelding 1 van 3 Garmin Nuvi 42LM Screen Replacement: stap 2, afbeelding 2 van 3 Garmin Nuvi 42LM Screen Replacement: stap 2, afbeelding 3 van 3

    • Pry the GPS open using a plastic opening tool.

    • When prying open the device, use caution to avoid damaging the motherboard.

    Bewerken

  3. Garmin Nuvi 42LM Screen Replacement, Motherboard: stap 3, afbeelding 1 van 3 Garmin Nuvi 42LM Screen Replacement, Motherboard: stap 3, afbeelding 2 van 3 Garmin Nuvi 42LM Screen Replacement, Motherboard: stap 3, afbeelding 3 van 3

    • Using the T5 Torx screwdriver, remove the two screws located on the motherboard.

    • There are two screws - one in the back and one in the front.

    Bewerken

  5. Garmin Nuvi 42LM Screen Replacement: stap 4, afbeelding 1 van 1

    • Move the motherboard from from its designated location on the GPS.

    • Do not pull on red, green, and black cables when repositioning the motherboard.

    Bewerken

  6. Garmin Nuvi 42LM Screen Replacement: stap 5, afbeelding 1 van 2 Garmin Nuvi 42LM Screen Replacement: stap 5, afbeelding 2 van 2

    • Gently unplug the red, green, and black bundled cable to remove the battery.

    Bewerken

  7. Garmin Nuvi 42LM Screen Replacement: stap 6, afbeelding 1 van 2 Garmin Nuvi 42LM Screen Replacement: stap 6, afbeelding 2 van 2

    • Use blue plastic opening tool to carefully pry the battery from the GPS.

    • You might need to use additional force when prying because there is adhesive glue on the back of the battery.

    Bewerken

  8. Garmin Nuvi 42LM Screen Replacement: stap 7, afbeelding 1 van 1

    • Using a soldering iron, desolder the black and blue wires connected to the motherboard.

    • Once the black and blue wires are desoldered, llift the motherboard out and away from the device.

    • Check out this awesome guide on how to solder and desolder connections.

    Bewerken

  9. Garmin Nuvi 42LM Screen Replacement, Screen: stap 8, afbeelding 1 van 2 Garmin Nuvi 42LM Screen Replacement, Screen: stap 8, afbeelding 2 van 2

    • Push out the screen by pulling back the black clips.

    • The screen is attached to the motherboard and needs to be replaced with it.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Één opmerking

Where do I purchase the screen for the Nuvi 42LM?

DR ROGER BROWNE - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 466