Ga door naar hoofdinhoud

Inleiding

If your power button is defective, replace the old one with the new power button.

  1. Remove the barcode sticker at the bottom of the device.
    • Remove the barcode sticker at the bottom of the device.

  2. Remove two 8.4 mm T5 screws from the bottom of the device.
    • Remove two 8.4 mm T5 screws from the bottom of the device.

  3. Using a plastic opening tool, carefully pry open the device. Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.
    • Using a plastic opening tool, carefully pry open the device.

    • Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.

  4. Remove the power button. Remove the power button.
    • Remove the power button.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Timothy

Lid sinds: 26-01-12

56 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 9-3, Regan Winter 2012 Lid van Cal Poly, Team 9-3, Regan Winter 2012

CPSU-REGAN-W12S9G3

5 Leden

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 13

Altijd: 9,315