Inleiding
If the buttons are unresponsive or sticking, the keypad may be compromised and need to be replaced. This is a guide to replace the keypad buttons of the Garmin GPSmap 60CSx.
Wat je nodig hebt
-
-
Lift and twist the battery cover release 90 degrees counterclockwise on the back of the device.
-
-
-
-
Remove the six 10 mm screws on the back of the device with a Phillips #0 screwdriver.
-
Flip the back panel over to view the green electronics board (the PCB) and the PCB covering.
-
Remove the black, yellow, blue, and red wires connected to the PCB with light force.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
3 andere personen hebben deze handleiding voltooid.