Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

This guide will give you step-by-step instructions on how to quickly swap out that old battery for a new one.

  1. Remove the five 7mm screws with H1.3 hex screwdriver. Remove the five 7mm screws with H1.3 hex screwdriver.
    • Remove the five 7mm screws with H1.3 hex screwdriver.

  2. Use a plastic opening tool to remove the face of the device to expose the inner components. There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well. Be careful with the ribbon that connects the motherboard to the display.
    • Use a plastic opening tool to remove the face of the device to expose the inner components.

    • There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well.

    • Be careful with the ribbon that connects the motherboard to the display.

  3. Proceed to disconnect the ribbon from the motherboard using tweezers.
    • Proceed to disconnect the ribbon from the motherboard using tweezers.

  4. Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits

    Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits
  5. Using a T5 screwdriver, remove the two 5mm screws. The motherboard should now move freely.
    • Using a T5 screwdriver, remove the two 5mm screws.

    • The motherboard should now move freely.

  6. Another ribbon is attached to the top of the motherboard. Disconnect this ribbon.
    • Another ribbon is attached to the top of the motherboard. Disconnect this ribbon.

  7. Disconnect wires connecting battery to motherboard.
    • Disconnect wires connecting battery to motherboard.

  8. The battery is glued to the motherboard and will need pried off using the nylon spudger.
    • The battery is glued to the motherboard and will need pried off using the nylon spudger.

  9. Now attach the new battery with adhesive and reassemble.
    • Now attach the new battery with adhesive and reassemble.

Conclusie

To reassemble your device, follow these instructions in reverse order.

19 andere personen hebben deze handleiding voltooid.

Victor Tanguy

Lid sinds: 26-03-18

750 Reputatie

1 Handleiding geschreven

Team

IUPUI, Team S1-G6, Harley Spring 2018 Lid van IUPUI, Team S1-G6, Harley Spring 2018

IUPUI-HARLEY-S18S1G6

3 Leden

2 handleidingen geschreven

Does anybody do It in a fenix 5?

Fernando Alcaraz - Antwoord

Same question. Fenix five /+ guide on the way?

Erik E123 -

Thank you. It saved me around over £100 to change the battery myself. Garmin quoted around £121 for battery replacement for out of warranty watch. I bought the battery around £15 and followed the guide to change the battery myself in my Fenix 3 watch. My watch does not have heart rate monitor, perhaps the ribon at step 5 is for HR monitor as I didn’t have it in my watch. Thanks again for simple, detailed and easy to follow instructions.

Asif Shafiq - Antwoord

Where did you get the battery?

Alex -

Amazon or other 3 Party Sellerie use google for search the are tonns of Shops wich sell it

Andreas Kahl -

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 22

Afgelopen 7 dagen: 240

Afgelopen 30 dagen: 1,206

Altijd: 24,897