Inleiding
Be very careful when handling connector wires, as they are incredibly easily broken. This guide is unique only in removing the circuit board from the screen.
Wat je nodig hebt
-
-
Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.
-
-
Stap 3 Water Proof Gasket
Voorzichtig: stap 3 komt van een handleiding die in bewerking is.
-
Remove the orange gasket.
-
-
Bijna klaar!
To reassemble your device, follow these instructions in reverse order.
Conclusie
To reassemble your device, follow these instructions in reverse order.