Ga door naar hoofdinhoud
  1. Deze stap is niet vertaald. Help het te vertalen

    Locate the battery compartment on the back of the Game Boy Color. Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.
    • Locate the battery compartment on the back of the Game Boy Color.

    • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

  2. Deze stap is niet vertaald. Help het te vertalen

    Remove the batteries from the battery compartment.
    • Remove the batteries from the battery compartment.

  3. Deze stap is niet vertaald. Help het te vertalen

    Using a Y1 screwdriver, remove the six screws on the back of the device as pictured.  The bottom two screws are located inside of the battery compartment.
    • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

  4. Deze stap is niet vertaald. Help het te vertalen

    Gently lift and separate the back housing from the rest of the device.  Now you've got the back housing out! Gently lift and separate the back housing from the rest of the device.  Now you've got the back housing out!
    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

  5. Deze stap is niet vertaald. Help het te vertalen

    Push up on the tabs on either side of the ribbon with a spudger.
    • Push up on the tabs on either side of the ribbon with a spudger.

  6. Deze stap is niet vertaald. Help het te vertalen

    Gently remove the ribbon cable from the port
    • Gently remove the ribbon cable from the port

  7. Deze stap is niet vertaald. Help het te vertalen

    Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture. Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.
    • Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.

  8. Deze stap is niet vertaald. Help het te vertalen

    Gently lift the motherboard from the front housing.
    • Gently lift the motherboard from the front housing.

Eindstreep

16 andere personen hebben deze handleiding voltooid.

Alex Wu

Lid sinds: 11-01-13

1.170 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 19-47, Regan Winter 2013 Lid van Cal Poly, Team 19-47, Regan Winter 2013

CPSU-REGAN-W13S19G47

4 Leden

45 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 5

Afgelopen 7 dagen: 19

Afgelopen 30 dagen: 95

Altijd: 11,199