Inleiding

The Game Boy Color's motherboard contains all the electronics that make it operate. This guide will show you how to remove the circuit board from the Game Boy Color.

Locate the battery compartment on the back of the Game Boy Color.
  • Locate the battery compartment on the back of the Game Boy Color.

  • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

Voeg opmerking toe

Remove the batteries from the battery compartment.
  • Remove the batteries from the battery compartment.

Voeg opmerking toe

  • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

Voeg opmerking toe

  • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

Voeg opmerking toe

  • Push up on the tabs on either side of the ribbon with a spudger.

Voeg opmerking toe

  • Gently remove the ribbon cable from the port

Voeg opmerking toe

  • Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.

Voeg opmerking toe

  • Gently lift the motherboard from the front housing.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

10 andere personen hebben deze handleiding voltooid.

Alex Wu

Lid sinds: 11-01-13

794 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 19-47, Regan Winter 2013 Lid van Cal Poly, Team 19-47, Regan Winter 2013

CPSU-REGAN-W13S19G47

4 Leden

24 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 13

Afgelopen 30 Dagen: 66

Altijd: 6,234