Lay everything out
  • Lay everything out

Voeg opmerking toe

Remove the drum key and Allen wrenches from the right side of the primary pedal. Remove the drum key and Allen wrenches from the right side of the primary pedal.
  • Remove the drum key and Allen wrenches from the right side of the primary pedal.

Voeg opmerking toe

Slide the ends of the long black connector onto the sides of the pedals. Both sides of the connection are shaped like a half-circle, so they can only connect in the proper orientation.
  • Slide the ends of the long black connector onto the sides of the pedals.

    • Both sides of the connection are shaped like a half-circle, so they can only connect in the proper orientation.

    • Ensure all the screws on the connector are pointing up. To do so, you will need to "wind" the secondary pedal up manually before attaching the connector.

Voeg opmerking toe

Insert the beaters into the primary pedal. You can choose to use either side of the beaters - just be consistent!
  • Insert the beaters into the primary pedal.

    • You can choose to use either side of the beaters - just be consistent!

Voeg opmerking toe

Arrange the pedals in the drumkit. The primary pedal should be centered on the kick drum, while the secondary pedal should be wherever comfortable. If necessary use the drum key to adjust the height of the beaters to be vertically centered on the kick drum. Now tighten everything down!
  • Arrange the pedals in the drumkit. The primary pedal should be centered on the kick drum, while the secondary pedal should be wherever comfortable.

  • If necessary use the drum key to adjust the height of the beaters to be vertically centered on the kick drum.

  • Now tighten everything down!

Voeg opmerking toe

Tighten and loosen the nuts on the bottom of the springs until both pedals have an even, comfortable tension.
  • Tighten and loosen the nuts on the bottom of the springs until both pedals have an even, comfortable tension.

Voeg opmerking toe

Replace the tools in the pedal for safe-keeping. Bag the extra parts in case you want to convert your double-bass pedal into two singles.
  • Replace the tools in the pedal for safe-keeping.

  • Bag the extra parts in case you want to convert your double-bass pedal into two singles.

Voeg opmerking toe

Pound out some sick beats!
  • Pound out some sick beats!

Voeg opmerking toe

Eindstreep

5 andere personen hebben deze handleiding voltooid.

James Pearson Hughes

Lid sinds: 27-05-10

617 Reputatie

1 Handleiding geschreven

Team

eXifiters Lid van eXifiters

Community

1 Lid

1 handleiding geschreven

Één commentaar

Nice to see some double bass enthusiasts on here! I am in the process of building an electronic midi drumset from piezos, some old stationary cardio equipment and an alesis dm5. The tooling, oh the tooling. Taps and dies, welding, now i need a lathe to make a double bass pedal from scratch... Www.gpsn.uspto.gov is a great resource for technical info and also creepy government technology. Ill post when i can. Peace

Scott Haddox - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 9

Afgelopen 30 Dagen: 38

Altijd: 1,621