Inleiding

The hinge cover has the computer power button, wireless switch, and volume toggle.

  1. Locate the two clips on the bottom of the computer that support the battery.
    • Locate the two clips on the bottom of the computer that support the battery.

  2. Using your fingers,  push the clips inward and then upward.
    • Using your fingers, push the clips inward and then upward.

    • Lift the battery out of the computer.

    • Use a spudger to lift the back of the hinge cover on the left and right sides of the computer.

    • Lay the computer flat on a stable surface with the monitor pointing away from you.

    • Use a spudger to partially lift the hinge cover.

    • The hinge cover has a ribbon cable that is attached to the motherboard. To prevent damage, lift the hinge cover slowly.

    • Lift the hinge cover enough to expose the ribbon cable.

    • Disconnect the ribbon cable from the motherboard and remove the hinge cover from the computer.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Neil Daniels

Lid sinds: 17-01-11

1.354 Reputatie

11 handleidingen geschreven

Team

Cal Poly, Team 5-18, Amido Winter 2011 Lid van Cal Poly, Team 5-18, Amido Winter 2011

CPSU-AMIDO-W11S5G18

3 Leden

11 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 3

Altijd: 3,028