Inleiding

The lens filter set is responsible for the correct color filtering of the pictures taken. To get to the filter set, remove the electrowind tape and remove the screws holding the lens filter set in place.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.
  • Remove the screws from the bottom of the camera using the tri-wing screwdriver.

    • Three 5.4 mm tri-head screws.

Voeg opmerking toe

Remove screws from charger side of camera using the Phillips 00 screwdriver.
  • Remove screws from charger side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Voeg opmerking toe

  • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Voeg opmerking toe

  • Separate the front and back casing using the spudger.

  • Gently pull apart the two casings.

  • Pull the back casing away from the camera.

Voeg opmerking toe

  • Remove electrowind strip from font cover.

    • The front cover does not have to be separated from the device for this step or the next ones.

Voeg opmerking toe

  • Remove lens data cable by gently pulling it out.

Voeg opmerking toe

  • Remove lens filter.

    • There are multiple square pieces, so be sure to remove them all.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Sarah Looper

Lid sinds: 11-03-13

76 Reputatie

7 handleidingen geschreven

Team

Clemson, Team 13-4, Benson Spring 2013 Lid van Clemson, Team 13-4, Benson Spring 2013

CLEM-BENSON-S13S13G4

2 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 4

Altijd: 469