Inleiding
The Selector is an important part of the camera because it controls the LCD screen. To replace it, follow the below steps.
Wat je nodig hebt
-
-
-
Remove the 4mm JIS #00 screws from the sides and bottom of the camera.
-
-
-
To Replace the Selection button, carefully pull the button until the button has been fully detached.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
Één andere persoon heeft deze handleiding voltooid.