Repareer je spullen Gemeenschap Winkel

Fossil Q Marshal Gen 2 Screen Replacement

Inleiding

This repair guide will show you how to replace the screen on a Fossil Q Marshal Gen 2 smartwatch. Be careful not to damage the wiring or the metal connectors on your smartwatch.

Wat je nodig hebt

  1. Fossil Q Marshal Gen 2 Screen Replacement, Back Cover: stap 1, afbeelding 1 van 1

    • Squeeze retaining pins together to release chain from watch body. This can be done by hand or with tweezers.

    • Remove chain from opposing side of watch body.

    Bewerken

  2. Fossil Q Marshal Gen 2 Screen Replacement: stap 2, afbeelding 1 van 1

    • Use tweezers to grip the notches on the back cover, then unscrew the back cover (counter-clockwise) from the watch housing.

    • There is an actual tool made to remove this back cover, using the right tool may save you from scratching the back of watch with tweezers. The backcover tool can be purchased online, a local jeweler may also be willing to remove it for you.

    Bewerken

  4. Fossil Q Marshal Gen 2 Screen Replacement: stap 3, afbeelding 1 van 2 Fossil Q Marshal Gen 2 Screen Replacement: stap 3, afbeelding 2 van 2

    • Utilize tweezers or a spudger or your fingers to pull the black wire connector from the motherboard.

    • Utilize a spudger to pull the orange connector off of the motherboard.

    Bewerken

  5. Fossil Q Marshal Gen 2 Screen Replacement: stap 4, afbeelding 1 van 1

    • Utilize tweezers to pull the white battery connector from the motherboard.

    Bewerken

  6. Fossil Q Marshal Gen 2 Screen Replacement: stap 5, afbeelding 1 van 3 Fossil Q Marshal Gen 2 Screen Replacement: stap 5, afbeelding 2 van 3 Fossil Q Marshal Gen 2 Screen Replacement: stap 5, afbeelding 3 van 3

    • The internal electronics can now be pulled out of the watch as one unit leaving the screen remaining in the watch housing.

    • Taking the flat end of the spudger, pry it up.

    Bewerken

  7. Fossil Q Marshal Gen 2 Screen Replacement, Screen: stap 6, afbeelding 1 van 2 Fossil Q Marshal Gen 2 Screen Replacement, Screen: stap 6, afbeelding 2 van 2

    • The screen can now be removed out of the front-side of the watch.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

12 andere personen hebben deze handleiding voltooid.

Auteur

met 4 andere bijdragers

Matthew Tucker

Lid sinds: 11/07/17

580 Reputatie

3 handleidingen geschreven

Medailles: 12

+9 andere badges

Team

IUPUI, Team S2-G5, Harley Fall 2017 Lid van IUPUI, Team S2-G5, Harley Fall 2017

IUPUI-HARLEY-F17S2G5

3 Leden

6 handleidingen geschreven

17 opmerkingen

Where can i find a replacement screen for the founder q 2.0 version?

Jack Seitz - Antwoord

Where can I buy replacement screen for gen 1

David Aslamazashvili -

Is the screen glued to the bezel of the watch?

Jose - Antwoord

Hello,

Do you have spare parts for the Fossil Q Marshal gen 2 watch?

Alexis Stellato - Antwoord

Where can I find a replacement screen for this devise?, I’ve done a little searching but I’m struggling to find someone who sells the replacement parts.

evans.nathan6 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 12

Afgelopen 30 dagen: 59

Altijd: 18,929