Inleiding

After too many charging cycles, the battery's capacity will be decreased. This is true for any Lithium-ion battery. Luckily the replacement of the battery in this device is very simple.

Onderdelen

Geen onderdelen nodig.

  1. To open up the casing, you will need to unscrew the four Phillips #0 15mm screws which are accessible from the back.
    • To open up the casing, you will need to unscrew the four Phillips #0 15mm screws which are accessible from the back.

    Voeg opmerking toe

  2. Gently separate the two halves of the casing.
    • Gently separate the two halves of the casing.

    Voeg opmerking toe

    • Disconnect the battery from the motherboard by lifting up on the white plastic tab on the top of the connection.

    • Gently pull the cord out by the white plastic adapter. Do not pull from the red and black cord.

    Voeg opmerking toe

    • Unscrew the Phillips four #0 15mm screws to free the motherboard from the casing.

    Voeg opmerking toe

    • Slowly pull the motherboard out of the casing. Make sure the loose battery wire doesn't get snagged.

    Voeg opmerking toe

    • Remove the four #0 15mm screws to release the battery housing from the case.

    Voeg opmerking toe

    • Take the battery housing and battery out of the casing.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Vladislav Ignatov

Lid sinds: 23-09-14

369 Reputatie

3 handleidingen geschreven

Team

USF Tampa, Team 12-5, Blackwell Fall 2014 Lid van USF Tampa, Team 12-5, Blackwell Fall 2014

USFT-BLACKWELL-F14S12G5

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 410