Repareer je spullen Gemeenschap Winkel

FoodSaver V4980 Seal Profile Replacement

Inleiding

In this guide, we will outline how to properly unhinge the rubber seal profile and replace it after cleaning or with a new seal profile.

  1. FoodSaver V4980 Seal Profile Replacement, Seal Profile: stap 1, afbeelding 1 van 1

    • Open the drawer on the bottom side of the FoodSaver first.

    Bewerken

  3. FoodSaver V4980 Seal Profile Replacement: stap 2, afbeelding 1 van 1

    • Gently pull the sides of the rubber seal profile with a finger and remove it from the device.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Mackenzie Grossgold

Lid sinds: 04/14/16

940 Reputatie

6 handleidingen geschreven

Medailles: 14

+11 andere badges

Team

Cal Poly, Team 34-17, Maness Spring 2016 Lid van Cal Poly, Team 34-17, Maness Spring 2016

CPSU-MANESS-S16S34G17

4 Leden

6 handleidingen geschreven

2 opmerkingen

Does anyone else have difficulty pulling the drip tray out? I’ve released the tabs on the bottom of the unit and tried pulling on the tray. I detect some movement but it won’t come out. If I pull any harder, I’ll probably break it.

Jerry - Antwoord

Who sells the parts for the Food Saver?

Bruce Carlton - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 10

Afgelopen 30 dagen: 33

Altijd: 9,120