Repareer je spullen Gemeenschap Winkel

Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler

Inleiding

This guide will teach you how to fix a jammed paper-roll in your Brother PT-90 Label-Maker.

Wat je nodig hebt

  1. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 1, afbeelding 1 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 1, afbeelding 2 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 1, afbeelding 3 van 3

    • Turn your label-maker on its face. Using your thumb, press in and then upward on the fastener located on the side of your device.

    Bewerken

  2. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 2, afbeelding 1 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 2, afbeelding 2 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 2, afbeelding 3 van 3

    • Remove the batteries from your device.

    Bewerken

  4. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 3, afbeelding 1 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 3, afbeelding 2 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 3, afbeelding 3 van 3

    • Using a plastic opening tool from your iFixit tool kit, leverage the label cartridge out of your device.

    Bewerken

  5. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 4, afbeelding 1 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 4, afbeelding 2 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 4, afbeelding 3 van 3

    • Press the label paper back into alignment with the small holders on the right side of the label cartridge.

    Bewerken

  6. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 5, afbeelding 1 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 5, afbeelding 2 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 5, afbeelding 3 van 3

    • Place the label cartridge and batteries back into your device. Refasten the bottom case of the label-maker.

    Bewerken

  7. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 6, afbeelding 1 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 6, afbeelding 2 van 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: stap 6, afbeelding 3 van 3

    • Well done! You have successfully corrected the paper-jam in your Brother PT-90 Label-Maker.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 4 andere bijdragers

Kaitlyn Abrams

Lid sinds: 10/13/16

1 Reputatie

1 Handleiding geschreven

Medailles: 2

Team

University of Maine, Team 2-1, Diaz Fall 2016 Lid van University of Maine, Team 2-1, Diaz Fall 2016

UMAINE-DIAZ-F16S2G1

3 Leden

2 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 7

Altijd: 791