Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Onderdelen

Geen onderdelen opgegeven.

  1. Find the power cord.
    • Find the power cord.

    • Make sure that it is unplugged from the outlet. This is to make sure that no power is flowing through and you are not injured.

  2. OPEN ALLE TABBLADEN

    RAM-upgradekits voor Mac

    Koop kits

    Genoeg RAM
    voor al je tabbladen

    Koop kits
  3. Locate all exposed portions of the wire.
    • Locate all exposed portions of the wire.

    • Tape over any exposed portions of the wire with electrical tape.

    • Use this power cord temporarily.

  4. Plug the power cord into the outlet and make sure the power cord is connected to the device. If not, connect the power cord to the back of the device.
    • Plug the power cord into the outlet and make sure the power cord is connected to the device. If not, connect the power cord to the back of the device.

    • Replace the damaged cable by purchasing a new cable at your local hardware store.

Eindstreep

Rosana Cheruvelil

Lid sinds: 26-09-12

126 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 7-50, Forte Fall 2012 Lid van Cal Poly, Team 7-50, Forte Fall 2012

CPSU-FORTE-F12S7G50

5 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 6

Altijd: 1,249