Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

Simple step-by-step instructions to replace the Refrigerator Water Filter Head & Tube Assembly WR17X12203.

  1. Disconnect the electric plug from the wall.
    • Disconnect the electric plug from the wall.

  2. Turn off or push down off water main valve from the wall.
    • Turn off or push down off water main valve from the wall.

  3. Remove the back panel with 6 screws from the back panel using a 8 mm nut driver. Remove the back panel with 6 screws from the back panel using a 8 mm nut driver. Remove the back panel with 6 screws from the back panel using a 8 mm nut driver.
    • Remove the back panel with 6 screws from the back panel using a 8 mm nut driver.

  4. Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits

    Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits
  5. Disconnect the water supplied line from the refrigerator using two  13 mm open-end wrenches. Use a little bucket to receive the water from the water lines.
    • Disconnect the water supplied line from the refrigerator using two 13 mm open-end wrenches.

    • Use a little bucket to receive the water from the water lines.

  6. Disconnect the water line from the water inlet valve using and open-end wrench size 15mm
    • Disconnect the water line from the water inlet valve using and open-end wrench size 15mm

  7. Disconnect the water line cover removing 2 screws  using a 7 mm nut driver. Pull up the gum seal compound.
    • Disconnect the water line cover removing 2 screws using a 7 mm nut driver.

    • Pull up the gum seal compound.

  8. Push the left side of the filter cover and pull it straight out.
    • Push the left side of the filter cover and pull it straight out.

  9. Remove the 2 screws  on top of the housing using  7 mm nut driver. Pull the housing and filter out slowly.
    • Remove the 2 screws on top of the housing using 7 mm nut driver.

    • Pull the housing and filter out slowly.

    • Remove the filter by turn it counterclockwise

Conclusie

To reassemble your device, follow these instructions in reverse order.

Giancarlo Marruffo

Lid sinds: 18-09-16

2 Reputatie

1 Handleiding geschreven

Team

Pasco Hernando, Team 5-1, Prince Fall 2016 Lid van Pasco Hernando, Team 5-1, Prince Fall 2016

PHSC-PRINCE-F16S5G1

1 Lid

1 handleiding geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 33

Altijd: 717