Inleiding

If you determine that your vacuum is no longer picking up debris, this guide will help you to replace the washable filters to increase the suction.

  1. Press the grey dust cup release button and gently pull the dust cup towards you.
    • Press the grey dust cup release button and gently pull the dust cup towards you.

    Voeg opmerking toe

  2. Lift the latch on the top of the dust cup cover to open. You can now see the foam filter inside the cyclone portion of the dust cup.
    • Lift the latch on the top of the dust cup cover to open. You can now see the foam filter inside the cyclone portion of the dust cup.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Remove the white filter by lifting the gray foam filter handle.

    Voeg opmerking toe

    • Push the white mesh, segment below the filter handle downward so it pops out of the grey filter holder. This will remove the filter.

    Voeg opmerking toe

    • If filter is unable to be washed, place a new filter in gray holder.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Celina Burchett

Lid sinds: 13-10-14

1.061 Reputatie

8 handleidingen geschreven

Team

Clemson, Team 2-2, Benson Fall 2014 Lid van Clemson, Team 2-2, Benson Fall 2014

CLEM-BENSON-F14S2G2

4 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 5

Afgelopen 30 Dagen: 36

Altijd: 3,227