Epson BrightLink 450wi Power Cord Replacement

Inleiding

The power source is the part the Epson Brightlink 450Wi you'll interact with the most. It includes all the ports you'll need in order to connect your device cables. The solution to many connection issues can be found through these ports. In the event of a connection issues or when in need of replacement, follow this guide.

Wat je nodig hebt

Stap 1 Power Cord

Epson BrightLink 450wi Power Cord Replacement, Power Cord: stap 1, afbeelding 1 van 1

Flip projector upside-down.
The panel cover for the power source is on the projector's left side when upside-down.

Vertaal

Stap 2

Begin unscrewing the two 11 mm screws that are attached to this cover plate. These screws will come loose and can be removed and placed in a safe location.

Vertaal

Stap 3

Epson BrightLink 450wi Power Cord Replacement: stap 3, afbeelding 3 van 3

Once the screws are removed begin pulling the cover plate off gently.
It will come off in one smooth motion by pulling away towards the left of the projector.

Vertaal

Stap 4

Epson BrightLink 450wi Power Cord Replacement: stap 4, afbeelding 3 van 3

Once the cover plate is removed, lift up the device and you will be able to see the plug for the power source.
To plug in, ensure the prongs on the plug are facing the right way to slot into the device power source port.

Vertaal