Epson BrightLink 450Wi Air Filter Replacement - iFixit reparatiehandleiding

Inleiding

The air filter is a very important part of the Epson Brightlink 450Wi. Although a small piece, it's absolutely vital to keep in good working condition. The air filter is important because it keeps your device clean and dust free.

When too much dust builds up it can cause the device to overheat, which can damage your device and cause malfunctions. In the event of a clogged air filter or when in need of replacement, follow this guide.

Stap 1 Air Filter

Epson BrightLink 450Wi Air Filter Replacement, Air Filter: stap 1, afbeelding 1 van 1

Rotate the projector on its side with the Wi-Fi symbol and sliding lock facing you.

Stap 2

Epson BrightLink 450Wi Air Filter Replacement: stap 2, afbeelding 1 van 3

Epson BrightLink 450Wi Air Filter Replacement: stap 2, afbeelding 2 van 3

Epson BrightLink 450Wi Air Filter Replacement: stap 2, afbeelding 3 van 3

Pull back the sliding lock in the direction away from the projector, and gently open the air filter door while still holding the lock open.

Stap 3

Epson BrightLink 450Wi Air Filter Replacement: stap 3, afbeelding 1 van 3

Epson BrightLink 450Wi Air Filter Replacement: stap 3, afbeelding 2 van 3

Epson BrightLink 450Wi Air Filter Replacement: stap 3, afbeelding 3 van 3

Grab the air filter center tab, and pull it gently away from the projector.
Replace the filter by slotting in a new filter the same way it was pulled out.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

Evan Sandoval

Lid sinds: 09/11/23

441 Reputatie

3 handleidingen geschreven

+2 andere badges

Team

Austin Community College, Team 9-1, Watkins Spring 2024 Lid van Austin Community College, Team 9-1, Watkins Spring 2024

AUSTINCC-WATKINS-S24S9G1

4 Leden

3 handleidingen geschreven

0 opmerkingen

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 3

Altijd: 76