Repareer je spullen Gemeenschap Winkel

Ematic Funtab FTABXXX Speaker Repositioning

Inleiding

The speaker would need to be re-positioned if the speaker has moved when the device was opened and now it creates a buzzing noise. This guide is recommend to follow in conjunction with our speaker replacement guide.

Wat je nodig hebt

  1. Ematic Funtab FTABXXX Speaker Repositioning, Speaker: stap 1, afbeelding 1 van 2 Ematic Funtab FTABXXX Speaker Repositioning, Speaker: stap 1, afbeelding 2 van 2

    • Open the case to get to the speaker.

    • Be mind full of the clips so that they don't get broken when opening the case. The clips are on the blue side and clip into the white side of the case.

    Bewerken

  3. Ematic Funtab FTABXXX Speaker Repositioning: stap 2, afbeelding 1 van 1

    • Locate the speaker on the back of the screen.

    Bewerken

  4. Ematic Funtab FTABXXX Speaker Repositioning: stap 3, afbeelding 1 van 2 Ematic Funtab FTABXXX Speaker Repositioning: stap 3, afbeelding 2 van 2

    • Locate the speaker housing on the blue case.

    • Arrange the speaker on the back of the screen so when the case is snapped back together the speaker will fit inside of the housing.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 1 andere bijdrager

Xavier Smith

Lid sinds: 01/21/15

210 Reputatie

2 handleidingen geschreven

Medailles: 3

Team

USF Tampa, Team 6-3, Brown Winter 2015 Lid van USF Tampa, Team 6-3, Brown Winter 2015

USFT-BROWN-W15S6G3

3 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 3

Altijd: 119