Edwin the Duck Rubber Gasket Seal Replacement

Inleiding

The motherboard compartment is the central identity of the duck and if water gets inside of it, Edwin will no longer work. With this guide, we are going to help you through the steps of replacing the rubber gasket seal, which prevents water from entering the motherboard compartment of Edwin.

Wat je nodig hebt

Stap 1 Rubber Gasket Seal

Edwin the Duck Rubber Gasket Seal Replacement, Rubber Gasket Seal: stap 1, afbeelding 1 van 2

Edwin the Duck Rubber Gasket Seal Replacement, Rubber Gasket Seal: stap 1, afbeelding 2 van 2

Unscrew the four 9mm screws with aT8 bit
Take the back plate off

Bewerken

Stap 2

Carefully take off the rubber skin.
Be patient and don't rush. You don't want to rip or damage the rubber skin otherwise you will lose the waterproof cover.

Bewerken

Stap 3

Using the J1 bit, unscrew all six 9 mm screws around the border.

Bewerken

Stap 4

Use the plastic opening tool to open the inside of the duck.
Be very careful when splitting the two halves apart. There are wires connecting to both sides. So open it very slowly.