Repareer je spullen Gemeenschap Winkel

Eclipse 180BL Touch Pad Replacement

Inleiding

If you have an unresponsive touch pad, sticking buttons, or just want a fresh touch pad in your device, this guide is for you!

Wat je nodig hebt

  1. Eclipse 180BL Touch Pad Replacement, Touch Pad: stap 1, afbeelding 1 van 1

    • Remove the two screws at the bottom of the device.

    • The two screws can be removed using the PH00 head located in the iFixit Repair toolkit.

    • The two screws are 1/8 inch in length.

    • Remove the cover to reveal the internal component.

    Bewerken

  3. Eclipse 180BL Touch Pad Replacement: stap 2, afbeelding 1 van 3 Eclipse 180BL Touch Pad Replacement: stap 2, afbeelding 2 van 3 Eclipse 180BL Touch Pad Replacement: stap 2, afbeelding 3 van 3

    • Using the Spudger, forcefully push upward on the USB port of the device to remove the main component.

    • This will release the tension on the multiple parts. One of which will be the touch pad.

    • The touch pad can now be easily replaced.

    • The touch pad has a smaller center piece that must be replaced for proper usage of the device.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Thomas Schwarz

Lid sinds: 09/07/15

499 Reputatie

3 handleidingen geschreven

Medailles: 10

+7 andere badges

Team

USF Sarasota-Manatee, Team 1-2, Stewart Fall 2015 Lid van USF Sarasota-Manatee, Team 1-2, Stewart Fall 2015

USFSM-STEWART-F15S1G2

5 Leden

17 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 4

Altijd: 640