Ga door naar hoofdinhoud

EVGA x17 Clicker Replacement

Wat je nodig hebt

  1. EVGA x17 Clicker Replacement, Clicker: stap 1, afbeelding 1 van 1
    • Remove the mouse skates to reveal 5 screws.

  2. EVGA x17 Clicker Replacement: stap 2, afbeelding 1 van 1
    • Use a Phillips head screwdriver to remove the 5 screws that secure the bottom panel.

  3. EVGA x17 Clicker Replacement: stap 3, afbeelding 1 van 1
    • Remove the weight chamber cover.

  4. EVGA x17 Clicker Replacement: stap 4, afbeelding 1 van 1
    • Slowly slide a spudger into and around the bottom of the panel, prying until a "popping" sound is heard.

  5. EVGA x17 Clicker Replacement: stap 5, afbeelding 1 van 2 EVGA x17 Clicker Replacement: stap 5, afbeelding 2 van 2
    • Remove the 13 screws on the interior.

    • There are 2 Phillips truss-head tapping screws, large circular heads, and the 11 Phillips screws from the interior.

  6. EVGA x17 Clicker Replacement: stap 6, afbeelding 1 van 1
    • Carefully slide the middle section out.

  7. EVGA x17 Clicker Replacement: stap 7, afbeelding 1 van 1
    • Remove the two screws from each clicker.

  8. EVGA x17 Clicker Replacement: stap 8, afbeelding 1 van 1
    • Pop and slide out each clicker that needs to be replaced.

    • Clickers may need to be tugged forward in their slots to slide out.

    • Be extra careful removing clickers because the attachments are fragile.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Sydney Puett

Lid sinds: 09/13/23

584 Reputatie

3 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 10

Altijd: 118