Ga door naar hoofdinhoud

Inleiding

In the case of a smelly device or loss of suction, a filter cleaning or replacement may help to maintain the Dyson V8 Absolute. It is important that the filters are cleaned frequently, at least once a month. The device contains a pre-filter and the HEPA filter. The HEPA filter, is filtering post cycled air through the device. The pre-filter is the initial filtering of debris suctioned.

Gereedschap

Geen gereedschap opgegeven.

  1. First, make sure the device is unplugged.
    • First, make sure the device is unplugged.

    • Pull the pre-filter up by the knob.

  2. Twist the HEPA filter to the left, matching up two black dots on the device and pulling away. Twist the HEPA filter to the left, matching up two black dots on the device and pulling away.
    • Twist the HEPA filter to the left, matching up two black dots on the device and pulling away.

Conclusie

To reassemble your device, follow these instructions in reverse order.

10 andere personen hebben deze handleiding voltooid.

Miranda Laberge

Lid sinds: 19-10-17

637 Reputatie

2 handleidingen geschreven

Team

UW Tacoma, Team S1-G5, Rose Fall 2017 Lid van UW Tacoma, Team S1-G5, Rose Fall 2017

UWT-ROSE-F17S1G5

4 Leden

10 handleidingen geschreven

Één commentaar

You didn’t cover cleaning

Ric Riester - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 41

Afgelopen 30 dagen: 172

Altijd: 19,542