Ga door naar hoofdinhoud

Inleiding

The Cyclone will need replacement if broken. There are multiple mechanisms in place to make access to the Cyclone easy.

  1. First, make sure the device is unplugged and detach the wand from the main unit. Pull the bin release trigger.
    • First, make sure the device is unplugged and detach the wand from the main unit.

    • Pull the bin release trigger.

    • Some force is required to slowly pull the trigger up. lift the Cyclone until it stops.

  2. While holding the disposal tab, press on the red button within the device. Continue to lift up with red button held until cyclone is removed. Make sure the bottom of the bin opens when the Cyclone is removed
    • While holding the disposal tab, press on the red button within the device.

    • Continue to lift up with red button held until cyclone is removed.

    • Make sure the bottom of the bin opens when the Cyclone is removed

  3. Pull the pre-filter up by the knob. Pull the pre-filter up by the knob.
    • Pull the pre-filter up by the knob.

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Jesse Coward

Lid sinds: 30-10-17

221 Reputatie

1 Handleiding geschreven

Team

UW Tacoma, Team S1-G5, Rose Fall 2017 Lid van UW Tacoma, Team S1-G5, Rose Fall 2017

UWT-ROSE-F17S1G5

4 Leden

10 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 21

Afgelopen 30 dagen: 64

Altijd: 4,654