Ga door naar hoofdinhoud

Dreamax DMX-ST7A Speaker Replacement

Wat je nodig hebt

  1. Dreamax DMX-ST7A Speaker Replacement, Back Cover: stap 1, afbeelding 1 van 1
    • Position the tablet so the ports and screws are facing you.

  2. Dreamax DMX-ST7A Speaker Replacement: stap 2, afbeelding 1 van 1
    • Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.

  3. Dreamax DMX-ST7A Speaker Replacement: stap 3, afbeelding 1 van 2 Dreamax DMX-ST7A Speaker Replacement: stap 3, afbeelding 2 van 2
    • Use the plastic opening tool to assist in removing the back cover.

  4. Dreamax DMX-ST7A Speaker Replacement: stap 4, afbeelding 1 van 1
    • Upon removing the back cover position the tablet as seen in the picture.

  5. Dreamax DMX-ST7A Speaker Replacement, Speaker: stap 5, afbeelding 1 van 2 Dreamax DMX-ST7A Speaker Replacement, Speaker: stap 5, afbeelding 2 van 2
    • Remove the speaker from the back cover.

  6. Dreamax DMX-ST7A Speaker Replacement: stap 6, afbeelding 1 van 1
    • Remove the black and red wire from the Motherboard.

  7. Dreamax DMX-ST7A Speaker Replacement: stap 7, afbeelding 1 van 1
    • Install the new speaker by soldering the wires to the motherboard. For additional soldering instructions please view this page: Hoe moet je (de-)solderen?

Conclusie

To reassemble your device, follow these instructions in reverse order.

Stacey Mattila

Lid sinds: 03/18/15

543 Reputatie

5 handleidingen geschreven

Team

Michigan Tech, Team 1-4, Lauer Spring 2015 Lid van Michigan Tech, Team 1-4, Lauer Spring 2015

MTU-LAUER-S15S1G4

2 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 143