Ga door naar hoofdinhoud

Disassembling the Inspiron 7359 2-in-1

Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.

Wat je nodig hebt

  1. Disassembling the Inspiron 7359 2-in-1, Disassembling the Inspiron 7359 2-in-1: stap 1, afbeelding 1 van 1
    • Turn off device before starting.

    • Turn the laptop upside down with the logo facing the surface of the table.

  2. Disassembling the Inspiron 7359 2-in-1: stap 2, afbeelding 1 van 2 Disassembling the Inspiron 7359 2-in-1: stap 2, afbeelding 2 van 2
    • Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.

  3. Disassembling the Inspiron 7359 2-in-1: stap 3, afbeelding 1 van 1
    • Use a spudger to separate the back cover from the laptop.

    • Start from one corner and work your way around the edge of the cover.

    • Be careful not to bend or crack the back cover.

  4. Disassembling the Inspiron 7359 2-in-1: stap 4, afbeelding 1 van 1
    • All hardware components should be exposed.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

meetkumar desai

Lid sinds: 10/08/17

330 Reputatie

2 handleidingen geschreven

Team

Gateway, Team S1-G3, Saknee Fall 2019 Lid van Gateway, Team S1-G3, Saknee Fall 2019

GCC-SAKNEE-F19S1G3

4 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 86