Ga door naar hoofdinhoud

Disassembling Sony Vaio VGN-FW 590 Audio USB Board

Wat je nodig hebt

  1. Disassembling Sony Vaio VGN-FW 590 Audio USB Board, Audio USB Board: stap 1, afbeelding 1 van 1
    • - Remove battery.

    • - Remove memory tray door (1 Screw).

    • - Remove hard drive door (1 Screw).

    • - Remove hard drive (3 Screws).

  2. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: stap 2, afbeelding 1 van 1
    • - Remove all screws from the bottom cover. There are three types of screws. Marked here with Red Circles, Red Squares and Orange Circles.

  3. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: stap 3, afbeelding 1 van 1
    • - Remove CD/DVD Drive by sliding it out.

    • - Remove three more screws, which were hiding under the DVD drive.

  4. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: stap 4, afbeelding 1 van 1
    • - Carefully remove the cover, by unpopping it with a slim flathead, slide it out away from the RJ-45, HDMI and VGA ports.

  5. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: stap 5, afbeelding 1 van 1
    • - The audio/usb interface card is now within reach. Just remove the two screws and carefully slide out the flat connector to remove the card.

  6. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: stap 6, afbeelding 1 van 1
    • - Fire up the air compressor and blow out dust from the fan and heatsinks.

  7. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: stap 7, afbeelding 1 van 1
    • - If you are replacing your RAM, simply unpop the four latches and slide out the memory sticks.

Conclusie

To reassemble your device, follow these instructions in reverse order.

8 andere personen hebben deze handleiding voltooid.

Artem Nikulkov

Lid sinds: 10/22/10

313 Reputatie

1 Handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 20

Altijd: 21,081