Gevaar
Mogelijk gevaarlijk
Als deze procedure niet goed wordt gevolgd, kan deze leiden tot letsel. Werk voorzichtig en volg alle waarschuwingen.
Gevaar

Inleiding

My autofocus bearings were stopped, I could focus only between min to 0.5m. This will show how to reach a part which moves the lens and makes it to zoom and focus.

Done by Rimvydas Gudeliauskas

Gereedschap

Onderdelen

Geen onderdelen nodig.

  1. Take the lens away from camera
    • Take the lens away from camera

    • DO NOT FORGET: THAT YOU ARE DOING ALL ON YOUR OWN RESPONSIBILITY

    Voeg opmerking toe

  2. Unscrew the top part and detach it.
    • Unscrew the top part and detach it.

    • Unjoin cables. Be careful; they're delicate, and easily torn.

      • Try to avoid contact with the sensitive electronic components.

    • Unfasten the screws that hold the circuit board in place, and separate it from the rest of the lens assembly.

    Voeg opmerking toe

    • Take away zoom rubber and you will find srews

    Voeg opmerking toe

    • Just take parts you need until you reach what you want to fix

    • Zoom bearing can be taken away by unscrewing its srews.

    Voeg opmerking toe

    • Here is one of the parts which was broken, so I go to camera repair shop, and bought that parts. As this was not the only part broken, I had to leave for additional repair.

    • When you finish you can put all back together

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Rimvydas

Lid sinds: 29-03-12

296 Reputatie

1 Handleiding geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 4

Afgelopen 7 Dagen: 23

Afgelopen 30 Dagen: 135

Altijd: 24,632