Ga door naar hoofdinhoud

Disassembling Sanyo Katana Eclipse X's Back Panel

Wat je nodig hebt

  1. Disassembling Sanyo Katana Eclipse X's Back Panel, Back Panel: stap 1, afbeelding 1 van 2 Disassembling Sanyo Katana Eclipse X's Back Panel, Back Panel: stap 1, afbeelding 2 van 2
    • Press the battery release button located on the back of the phone.

    • With the button depressed, pull down on the battery protector to remove it from the phone.

    • The phone's battery will now be exposed.

  2. Disassembling Sanyo Katana Eclipse X's Back Panel: stap 2, afbeelding 1 van 1
    • Slide a thin object under the white tab located on the bottom of the battery and carefully lift away from the phone.

    • A small, flat-tip screwdriver or credit card may be helpful for this step.

    • The battery should now be free of the phone.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Thomas Scaggs

Lid sinds: 10/15/12

209 Reputatie

2 handleidingen geschreven

Team

University of Maine, Team 1-3, Diaz Fall 2012 Lid van University of Maine, Team 1-3, Diaz Fall 2012

UMAINE-DIAZ-F12S1G3

5 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 287