Onderdelen

Geen onderdelen nodig.

  1. Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.
    • Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.

    Voeg opmerking toe

  2. Remove the screw on each side of the device using a Phillips head screwdriver.
    • Remove the screw on each side of the device using a Phillips head screwdriver.

    Voeg opmerking toe

    • Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.

    • Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.

    Voeg opmerking toe

  3. Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK bij het afrekenen
    Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK
    • Using the philips screwdriver, remove the two screws on the mother board.

    Voeg opmerking toe

    • Place the pry tool in-between the front cover and mother board.

    • Gently separate the front cover.

    Voeg opmerking toe

    • After opening the front cover you will see and electric ribbon connecting the buttons to the mother board.

    Voeg opmerking toe

    • CAUTION: Do not rip the electric ribbon from the mother board.

    • Carefully flip up the plastic lip that holds the electric ribbon to the board.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Jason Farr

Lid sinds: 21-10-13

337 Reputatie

3 handleidingen geschreven

Team

Clemson, Team 14-8, Benson Fall 2013 Lid van Clemson, Team 14-8, Benson Fall 2013

CLEM-BENSON-F13S14G8

3 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 141