Inleiding

How to get to and remove the logic board

Onderdelen

Geen onderdelen nodig.

Push open the latch and remove the battery. Push open the latch and remove the battery.
  • Push open the latch and remove the battery.

Voeg opmerking toe

Twist off the antenna. Pop off the transparent cylinder.
  • Twist off the antenna.

  • Pop off the transparent cylinder.

Voeg opmerking toe

Remove the five screws as shown.
  • Remove the five screws as shown.

Voeg opmerking toe

Carefully pry the back plate off.
  • Carefully pry the back plate off.

Voeg opmerking toe

Carefully detach golden screen connector. Carefully detach golden screen connector.
  • Carefully detach golden screen connector.

Voeg opmerking toe

Pop out the logic board with spudger. Caution: Do not touch with bare hands, use tweezers or wash hands before contact.
  • Pop out the logic board with spudger.

  • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

Voeg opmerking toe

Place the logic board on a clean tray. Place the logic board on a clean tray.
  • Place the logic board on a clean tray.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

doconnor

Lid sinds: 19-04-10

25 reputatie

6 handleidingen geschreven

Team

Cal Poly, Team 10-43, Garner Spring 2010 Lid van Cal Poly, Team 10-43, Garner Spring 2010

CPSU-GARNER-S10S10G43

5 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 1,340