Onderdelen

Geen onderdelen nodig.

  1. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera.
    • Remove the screws from the bottom, right, and left side of camera.

  2. Remove the back of the camera, may require force.
    • Remove the back of the camera, may require force.

  3. Unscrew the right metal bracket of the viewing lens
    • Unscrew the right metal bracket of the viewing lens

  4. Unscrew the top right corner screw
    • Unscrew the top right corner screw

  5. Unscrew the bottom right corner screw.
    • Unscrew the bottom right corner screw.

  6. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.
    • Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.

  7. Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  8. Pull the front of the camera off of the mother board. Pull the front of the camera off of the mother board.
    • Pull the front of the camera off of the mother board.

  9. Unscrew the grey plastic around the screen
    • Unscrew the grey plastic around the screen

  10. Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.
    • Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.

  11. Maneuver to detach the flash bulb.
    • Maneuver to detach the flash bulb.

  12. Unscrew the metal bracket under the lens
    • Unscrew the metal bracket under the lens

  13. Slide the plastic bracket through the metal bracket.
    • Slide the plastic bracket through the metal bracket.

    • Remove the orange cable from the motherboard.

  14. Pull the black tape off.
    • Pull the black tape off.

  15. Unscrew the two screws underneath.
    • Unscrew the two screws underneath.

    • Remove lens

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Crista Riedy

Lid sinds: 12-02-13

406 Reputatie

3 handleidingen geschreven

Team

Ohio State, Team 1-2, Buehl Spring 2013 Lid van Ohio State, Team 1-2, Buehl Spring 2013

OSU-BUEHL-S13S1G2

2 Leden

5 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 524